HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-47
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
c. Click Summary to display the state of all the interfaces. The example configuration uses
a four-port sensor, and by default that sensor is configured as shown in Figure 3-46.
Figure 3-46. The Interfaces Summary Window
2. Enable two interfaces. To use the sensor as an IPS, you need to use two of its ports
(interfaces) as an interface pair.
a. In the left navigation bar, click Interfaces.
b. Select the first interface that you want to pair.
c. Click Enable.
d. Select the second interface.
e. Click Enable.
f. Click Apply.
The example uses interfaces GigabitEthernet0/1 and GigabitEthernet0/2. You might have
different interfaces available on your sensor.