HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-62
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
7. If your UTM device does not have current operating system, install it now.
a. In the navigation bar, click the System tab.
b. Click Status.
c. In the Firmware Version section, click Update.
Figure 3-61. Updating the FortiGate Operating System
d. Click Browse, browse to the .out firmware file you downloaded earlier, select it, and
click Open. The file path will appear in the Upload File section.
e. Click OK. The new operating system is uploaded to the UTM device.
8. Set the UTM device to transparent mode and assign an IP address on your network.
a. In the navigation bar, click the System tab.
b. Click Status.