HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-66
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
Figure 3-65. Configuring New SNMP Community Parameters
Depending on which model of the UTM device you are using and how you are using it in your
network, you might use various combinations of interfaces (such as WAN or external inter-
faces, internal interfaces, or DMZ interfaces). Each interface you use must be configured for
SNMP to allow communication with PCM+.
To configure an individual interface for SNMP, complete the following steps:
1. In the navigation bar, click the System tab.
2. Click Network.
3. Click the Interface tab at the top of the window.