HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-73
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
f. Scroll down (if necessary) to the Logging section and expand it.
g. In the IPS section, select the Log Intrusions check box.
Figure 3-75. Enable Logging for IPS Events
h. Scroll down (if necessary) and click OK.
4. Set up logging on the UTM. This allows you to verify that the UTM sees the event activity.
a. In the navigation bar, click the Log & Report tab.
b. Click Log Config.
c. Click Log Setting.
d. Select the Memory checkbox to enable logging to the UTM’s memory.
e. Expand the Memory section to display the Minimum severity level settings.
f. In the drop-down box, select the minimum severity level. Any events of this severity
level or higher will be logged to the UTM’s memory. When testing the UTM device’s
communication with PCM+/NIM, you might want to select Information.