HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-90
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
Figure 3-95. The DHCP Server Window
2. Clear the Enable DHCP Server check box.
3. Click Accept.
Configure SNMP Settings and Discover the UTM Device in PCM+. PCM+ uses SNMP
to communicate with all the devices it manages. You must configure SNMP settings on the UTM
device, so it can send SNMP traps to PCM+/NIM.
SNMP configuration includes setting global settings for the UTM device as well as settings for
each of the affected interfaces. You will configure the individual interface settings in the IPS
and IDS configuration subtasks later in this section.
To configure the global SNMP settings, complete the following steps:
1. In the left navigation bar, click System > Administration.