HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-94
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
Set the UTM Device’s Idle Timeout (Optional). The idle timeout is set to 5 minutes by
default. You will probably want to set it to a larger value to avoid having to log in frequently.
To set the idle timeout, complete the following steps:
1. In the left navigation bar, click System > Administration.
2. Under Login Security, type a new value in the Log out the administrator after inactivity of
(minutes) box.
Figure 3-100. Configuring the Idle Timeout
3. Click Accept.
Change the Password. Complete the following steps:
1. In the left navigation bar, click System > Administration.
2. For Old password under Administrator Name & Password, type the current password (factory
default is password).