HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-96
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
The example network shown in Figure 3-102 uses a UTM device to protect a data center from
malicious activity in the rest of the network.
Figure 3-102. A Sample Network Using an IPS Device
Configure the Network Ports. You will need to configure two network ports for inline IPS
operation. This section outlines the setup on ports X0 and X1. (On UTM devices with many
ports, you can use any two ports.) One port must be configured as a WAN port and one as a
LAN port. Otherwise the UTM device might not send SNMP traps to PCM+.
To configure the network ports, complete the following steps:
1. In the left navigation bar, click Network > Interfaces.
2. On the X1 line, click the Configure icon.