HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-98
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
Figure 3-104. The Edit Interface X1 Window
4. Click OK.
5. Click the Configure icon on the X0 line.
6. In the Edit Interface window that is displayed, fill in the following values:
• Zone: LAN
• IP Assignment: Layer 2 Bridged Mode
• Bridged to: X1
• Management: Select the check boxes for all communication types you will use in
managing the device. At a minimum, these should include HTTP, HTTPS, ping,
and SNMP.