HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-103
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
Figure 3-110. SonicWall Security Services > Intrusion Prevention
6. Click Accept.
7. Click Configure IPS Settings.
8. Select the Enable IP Reassembly check box.
9. Click OK.
10. If you want to fine tune response of categories of signatures or individual signatures, set
the Categories drop-down list in the IPS Policies section to All signatures or to a signature
category. The selected signatures will be displayed, and you can set the parameters for any
individual signature by clicking the Configure icon on the right side of the signature’s entry.
Configure Logging. Setting up logging of attacks on the UTM device enables you to verify
that attacks are being detected and to receive traps. To set up logging:
1. Access the device’s Web browser interface.
2. In the left navigation bar, click Log > Categories.