HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-115
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
The configured security profile is shown below.
Figure 3-123. TippingPoint Create Security Profile Window
7. Click Save.
Subtask: Edit Action Sets
You will now edit the action sets that are used with NIM. Action sets determine what steps the
TippingPoint IPS takes if it detects a threat. To enable interaction with NIM, you will modify
the Permit + Notify + SNMP Trap or Permit + Notify action set, depending on which TippingPoint
IPS you are using.