HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-116
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
1. Click IPS > Action Sets.
Figure 3-124. TippingPoint IPS > Action Sets Window
2. Click the Notification Contacts tab in the right corner.
3. Click Add Contact.
Figure 3-125. TippingPoint Create Contact Window
4. Under Contact Details, configure settings for the PCM+/NIM Server.
a. For Contact’s Name, type a name such as PCM+ Server or NIM Server.
b. For Aggregation Period, accept the default setting of 1 minute or type a new setting.
c. For Host IP, type the IP address of the PCM+/NIM server. For example, you might enter
10.1.10.10.
d. For Port, accept the default setting of 162 unless your company uses a different port
for SNMP traffic.