HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-118
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 2: Detect Threats
Subtask: Configure SNMP Trap Settings
You will now configure the SNMP Trap settings on the TippingPoint IPS.
1. Click System > Configuration > SMS & NMS.
2. Under NMS Settings, type public for NMS Community String.
3. For NMS Trap IP Address, type the IP address of the PCM+/NIM server.
4. For NMS Trap Port, accept the default of 162 or type the port that your company uses for
SNMP traffic.
5. Click Add to table below.
Figure 3-128. TippingPoint > System > Configuration > SMS & NMS Window
6. Click Apply.
Subtask: Discover the TippingPoint IPS in PCM+
In this task, you will discover the TippingPoint IPS in PCM+, and it will then be displayed in
the PCM+ navigation tree.
1. Open the PCM+ management interface.
2. Click Tools > Manual Discovery.
3. When the Welcome window is displayed, click Next.
4. On the Enter Device Information window, enter the TippingPoint IPS’ IP address.