HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-132
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 3: Respond to Threats
Figure 3-141. PCM+ <Enable/Disable> Action Window in Policy Manager
7. Select the Disable.
8. Click Apply.
Task: Select Rate Limiting as an Action
If your third-party device or NIM detects suspicious behavior, you may want to limit the
bandwidth the offender can use.
To configure rate limiting action, complete the following steps:
1. Open Policy Manager by clicking Tools > Policy Manager.