HP ProCurve Threat Management Solution Implementation Guide 2009-05

3-134
HP ProCurve Network Immunity Manager with a Third-Party IDS/IPS
Step 3: Respond to Threats
6. Select the new action and click the Rate Limiting tab in the right pane.
Figure 3-143. PCM+ <Rate Limit> Action Window in Policy Manager
7. Select Configure rate limiting on targeted ports.
8. Select Enable rate limiting.
9. For Rate Limit, type a percentage.
10. Click Apply.
Subtask: Select Quarantine VLAN as an Action
If your third-party device or NIM detects suspicious behavior, you may want to place that
offender’s traffic in a quarantine VLAN.
To configure quarantine VLAN as an action, complete the following steps:
1. Open Policy Manager by clicking Tools > Policy Manager.