HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-4
HP ProCurve Network Immunity Manager with HP ProCurve Security Devices
Overview
Figure 4-1. Security Management Life Cycle
To complete the instructions outlined in this chapter, you must have a fully functional PCM+
server with both NIM and IDM installed. Further, you must have configured PCM+ and your
network infrastructure devices with the appropriate settings so that they can communicate.
PCM+ and NIM must be able to receive sFlow data samples and SNMP traps from network
infrastructure devices.
For instructions on installing PCM+ and NIM (including PCM agents and clients) and config-
uring network infrastructure devices, see Appendix A: “Initial Setup for HP ProCurve Manager
Plus and Network Immunity Manager.”