HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-30

HP ProCurve Network Immunity Manager with HP ProCurve Security Devices

Step 2: Detect Threats

-------------- ServiceOS -----------------

J9154A ServiceOS version 1.0.081219

Description: HD Service OS

Vendor: HP

Build Date: Dec 19 2008 11:56

Partitions: 1=TOOLS.0.081219 2=CFSOS.0.081219

3. If you have not done so already, activate the TMS OS by registering it, receiving a valid

license, and installing it on the module. (This process is explained in the HP ProCurve

Threat Management Services zl Module Management and Configuration Guide. If you

have not activated the TMS OS, you cannot take the next step—booting to the TMS OS.)

4. Boot to the TMS OS:

hostswitch(services-module-<slot ID>:HD)# boot product

Changing boot from Service OS to Product OS.

System will be rebooted. Do you want to continue [y/n]? y

You are returned to the switch’s CLI while the TMS zl Module reboots.

Subtask: Configure Management Access

To establish management access, you must complete the following:

■ Enable management access on a zone

■ Optionally, configure a priority VLAN

■ Associate a VLAN with the zone

■ Configure a static IP address for the VLAN

■ Configure the default gateway

Figure 4-24. Management Access

Complete the following steps:

1. Verify the index number assigned to the TMS OS: