HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-34
HP ProCurve Network Immunity Manager with HP ProCurve Security Devices
Step 2: Detect Threats
ii. Ping the default gateway.
hostswitch (tms-module-C:config)# ping <default gateway>
12. Save the changes.
hostswitch(tms-module-C:config)# write memory
If you need additional information about setting up the TMS zl Module, see the HP ProCurve
Threat Management Services zl Module Management and Configuration Guide.
protocol •any
• <0-255>
•tcp
•udp
• icmp < any | echo | timestamp >
•esp
•ah
• igmp
•gre
•l2tp
•ospf
•pim
•ip
service • Services such as bootps, bootpc, http, or https
For a complete list of services, see the HP ProCurve Threat
Management Services zl Module Management and
Configuration Guide.
source address •any
•host <IP address>
• source network
• ip-range <start IP address> <end IP address>
• address <address object>
source port • port
• range <start port> <end port>
destination address •any
•host <IP address>
• destination network
• ip-range <start IP address> <end IP address>
• address <address object>
destination port • destination port
• range <start port> <end port>
extended options • schedule <schedule object>
This command must be entered before all other
extended options commands.
•log
•ips-off
• enable
• disable
• insert-at <position>
• update-at < position | id <policy ID> >
Parameter Options