HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-38
HP ProCurve Network Immunity Manager with HP ProCurve Security Devices
Step 2: Detect Threats
1. Select the logging level.
a. Click System > Logging > Settings.
b. From Log messages with, select Information.
Figure 4-29. TMS zl Module System > Logging > Settings
c. Accept the other default values and click Apply My Changes.
2. Specify the SNMPv2 trap server.
a. Click the SNMP Traps tab.
b. Select the Enable SNMPv2 traps check box.
c. Click Add another destination.
d. For Server Address, type the IP address of the PCM+/NIM server.
e. For Community Name, type the community name you are using for SNMP traps.
f. Click OK.
Figure 4-30. TMS zl Module System > Logging > SNMP Traps