HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-50
HP ProCurve Network Immunity Manager with HP ProCurve Security Devices
Step 2: Detect Threats
Figure 4-39. PCM+ Firewall Access Policies Wizard
9. In the left pane, click Add. A paper icon with a number 1 is displayed in the below the words
Add Delete.
Note that the configuration options on this window match the corresponding window in
the TMS zl Module’s Web browser interface.
10. For Action, select Permit Traffic or Deny Traffic.
11. For From, select the source zone.
12. For To, select the destination zone.
13. Define the Matching Criteria. The Options settings change the options that are available for
Service, Source, and Destination.
a. For Service, select one of the following:
– Accept the default settings: Any Service and Use defined objects.
– Configure a defined service: For Options, accept Use defined objects and then select a
service.
– Customized service—For Options, select Enter custom Protocol/Port, and then select a
protocol and enter port numbers.
b. For Source, select one of the following:
– Accept the default settings: Use defined objects and Any Address.
– Select a defined address object: For Options, accept Use defined objects and then select
an address object. You must configure this address object in advance.
– Customized service—For Options, select Enter custom IP, IP/mask or IP-Range, and then
type an IP address or IP address range.