HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-58
HP ProCurve Network Immunity Manager with HP ProCurve Security Devices
Step 2: Detect Threats
If the show services command does not show index 2, Threat Management Services zl Module,
the module might be booted to the Services OS. In this case, you need to boot the module to
the TMS OS.
1. Access the Services OS context:
hostswitch# services <slot_ID> 1
Replace <slot_ID> with the letter of the slot in which the module is installed.
Enter 1 to access the Services OS. (This is the index number that corresponds to that OS.)
If HD is displayed in the prompt, the module is booted to the Services OS, as shown below.
hostswitch(services-module-<slot ID>:HD)#
2. From the Services OS context, verify that the TMS OS is installed on the module and see
which version is installed:
hostswitch(services-module-<slot ID>:HD)# show version
Services Module Agent
Version: B.01.04.76
Build date: Dec 11 2008 11:34:01
BIOS: HP01R101
EEPROM: 0001
OPTROM: A.01.06
Running: ServiceOS
-------------- Product -----------------
J9155A TMS version 1.0.090206
Description: Threat Management Services zl Module
Vendor: HP
Build Date: Feb 06 2009 12:16
Partitions: 3=bootloader 5=primary 6=secondary 7 8=config
9=reserved
-------------- ServiceOS -----------------
J9154A ServiceOS version 1.0.081219
Description: HD Service OS
Vendor: HP
Build Date: Dec 19 2008 11:56
Partitions: 1=TOOLS.0.081219 2=CFSOS.0.081219
3. If you have not done so already, activate the TMS OS by registering it, receiving a valid
license, and installing it on the module. (This process is explained in the HP ProCurve
Threat Management Services zl Module Management and Configuration Guide. If you
have not activated the TMS OS, you cannot take the next step—booting to the TMS OS.)
4. Boot to the TMS OS. From the Services OS context, enter:
hostswitch(services-module-<slot ID>:HD)# boot product
hostswitch(services-module-<slot ID>:HD)# boot product
Changing boot from Service OS to Product OS.
System will be rebooted. Do you want to continue [y/n]? y
You are returned to the switch’s CLI while the TMS zl Module reboots.