HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-61
HP ProCurve Network Immunity Manager with HP ProCurve Security Devices
Step 2: Detect Threats
6. Click Save.
Subtask: Configure Log Settings
To configure log settings, complete the following steps:
1. Select System > Logging and click the Settings tab.
Figure 4-4. TMS zl Module > System > Logging > Log Settings Window
2. From the list, select the lowest severity level of the messages that you want to forward.
3. In the space provided, type the number of duplicate messages that you want to occur before
a tally message is forwarded.
Figure 4-5. Duplicate Message Text Box
4. In the space provided, type the number of seconds that you want to pass before a tally
message is forwarded.
Figure 4-6. Time Limit Text Box
5. Click Apply My Changes.
6. Click Save.