HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-63
HP ProCurve Network Immunity Manager with HP ProCurve Security Devices
Step 2: Detect Threats
7. Click Save.
Subtask: Configure SNMPv3 Settings. Complete the following steps:
1. From the System > Settings > SNMP window, select Enable SNMPv3.
2. Click Add another user. The Add SNMPv3 User window is displayed.
Figure 4-9. Add SNMPv3 User Window
3. For User Name, type the SNMPv3 user name for the account.
4. For Role, select the role of the account: Manager (read-write) or Operator (read only).
5. For Authentication Protocol, select the protocol used for the account: MD5 or SHA.
6. For Authentication Passphrase, type the authentication passphrase for the account.
7. For Privacy Protocol, select the privacy protocol used for the account: None, DES, or AES.
For the manager role, you must configure privacy settings. For the operator role, you have
the option to configure privacy settings, but are not required to do so.
8. If you selected a protocol in the previous step, for Privacy Passphrase type the privacy
passphrase for the account.
9. Click OK.
10. Click Save.
Configure SNMP Traps. The TMS zl Module supports the standard MIB-II, the IF-MIB, and
a proprietary MIB that is particular to the operation of the TMS zl Module.
Note If you configure SNMP traps from the PCM+ interface instead of from the TMS zl Module
interface, the module will send only MIB-II and IF-MIB traps to the PCM+ server, not proprie-
tary MIB traps. The proprietary MIB can be found in the help files on the module.