HP ProCurve Threat Management Solution Implementation Guide 2009-05

4-91
HP ProCurve Network Immunity Manager with HP ProCurve Security Devices
Step 3: Respond to Threats
8. Select the new action and then click the Port Mirroring tab.
Figure 4-69. PCM+ Actions > <Dynamic Mirroring> Window in Policy Manager
9. Complete step a or step b to configure a mirror destination:
a. Select Any available mirror destination and click Close.
b. Select Any of below selected mirror destinations.
i. Click Add. The Select Mirror Window is displayed. This window displays all ports
that are configured as destination mirrors, including the port you configured in
“Subtask: Configure a Destination Port in PCM+/NIM” on page 4-88.
Figure 4-70. PCM+ Select Mirror Port Window
ii. Select a destination port from the list and click OK.
iii. Click Apply.
iv. Click Close.