HP ProCurve Threat Management Solution Implementation Guide 2009-05

A-8
Initial Setup for HP ProCurve Manager Plus and Network Immunity Manager
Install PCM+
19. On this page you will configure communication between the server and remote agents.
Select the use default check boxes next to Password under both Server Identity and New
Agents. The corresponding passwords are automatically filled in.
Figure A-13. ProCurve Manager Install Wizard—Server to Agent Connection Page
20. Accept all other default settings and click Next. The PCM Administrator password page
opens.
21. Type the Password for the PCM+ Administrator.
22. Retype the password in the Confirm Password box.
Figure A-14. ProCurve Manager Install Wizard—PCM Administrator password Page
Take careful note of the password. You must enter it to access PCM+.