HP ProCurve Threat Management Solution Implementation Guide 2009-05

B-5
Initial Setup for the HP ProCurve Manager Agent
Install PCM+
9. In this example, you will not configure the PCM Agent to initiate communication with the
PCM server. If you wanted to choose this option, however, you would select the Agent
Initiates Connection check box. Then, in the PCM Server Information section, you would type
the IP address for the PCM server, and either accept the default password for the server
or clear the Use Default check box and type a new password in the Password field.
10. Accept the default port and encryption method, and click Next.
Figure B-6. ProCurve Manager Install Wizard—Choose Start Menu Folder Page
11. In the Choose Start Menu Folder page, accept the default folder as the location for program
shortcuts. You could also select a different location from the list provided, or the Do not
create shortcuts check box if desired.
12. Click Install. The installation process begins.