HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-5
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Site-to-Site IPsec VPN
Figure C-1. Add IP Address Object Window
c. Click Single-entry.
d. In the box below, type the IP address of this TMS zl Module on the VLAN on which it
contacts the remote gateway. For this example, type 10.1.1.2.
e. Click Apply.
4. Create an object for the remote VPN gateway address:
a. For Name, type a name that is meaningful to you. For this example, type RemoteGateway.
b. For Type , select IP.
Figure C-2. Add IP Address Object Window