HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-7
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Site-to-Site IPsec VPN
Figure C-4. Add IKE Policy Window—Step 1 of 3
4. For IKE Policy Name, type a string that is unique to this policy. For this example, type SiteB.
The string can include 1 to 15 alphanumeric characters.
5. For IKE Policy Type, select Site-to-Site (Initiator & Responder).
6. For Local Gateway, specify an IP address on this module. You have two options:
• Click IP Address and type the IP address in the box.
Type the same IP address that you configured for the local gateway address object (the
IP address on the VLAN on which this TMS zl Module contacts the remote module).
• Click Use VLAN IP Address and select a VLAN from the list. Select the VLAN on which
this module reaches the remote module.
7. For Remote Gateway, specify the IP address or FQDN of the remote TMS zl Module:
• Click IP Address (Peer ID) and type the IP address in the box.
Type the same IP address that you configured for the remote gateway address object
(the IP address at which this module contacts the remote module).
•Select Name and type the FQDN in the box.
The TMS zl Module must be able to resolve the FQDN to the remote gateway’s
accessible IP address. (Make sure that you have configured the DNS server settings
on the TMS zl Module.)