HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-19
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Site-to-Site IPsec VPN
Create an IPsec Policy for a Site-to-Site VPN That Uses IKE
This section explains how to configure an IPsec policy for a site-to-site VPN. The IPsec policy
includes the security settings for the VPN connection and also selects traffic for the connection.
Follow these steps to create the IPsec policy:
1. In the left navigation bar of the Web browser interface, select VPN > IPsec.
2. Click the IPsec Policies tab.
Figure C-25. VPN > IPsec > IPsec Policies Window
3. Click Add IPsec Policy. The Add IPsec Policy window is displayed.
Figure C-26. Add IPsec Policy Window—Step 1 of 4
4. For Policy Name, type a unique alphanumeric string between 1 and 10 characters. For this
example, type SiteBVPN.
5. By default the Enable this policy check box is selected, which means that the policy will
take effect as soon as you finish it. Leave this setting.
6. For Action, leave the default Apply.