HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-42
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Client-to-Site L2TP over IPsec VPN for Windows XP Clients
Figure C-51. Add Dial-In User Window—Step 1 of 3
4. For Dial-In User Name, type a name for this user. The name can be 1 to 16 alphanumeric
characters. For this example, type user1.
This setting only affects how the user is displayed in the dial-in user list on the module.
5. For Server IP Address/Subnet Mask, type the IP address and subnet of the TMS zl Module in
its capacity as L2TP Network Server (LNS). For this example, type 172.16.80.1/24.
This is a virtual IP address in an unused subnet (the subnet must not be configured as a
TMS VLAN or a VLAN on the host switch). The subnet will be automatically placed in the
External zone.
6. For User IP Address, type the IP address that is assigned to the remote client for the L2TP
connection. This IP address must be on the same subnet as the LNS address that you
configured in the previous step. For this example, type 172.16.80.10.
7. For Authentication, leave the default No Authentication.
8. Click Next.
Figure C-52. Add Dial-In User Window—Step 2 of 3
9. For Policy Group Name, select the user group that you configured on the TMS zl Module.
For this example, select RemoteUsers.