HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-48
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Client-to-Site L2TP over IPsec VPN for Windows XP Clients
Configure a Windows XP SP2 Client for L2TP over IPsec
This section includes step-by-step instructions for using the New Connection Wizard to
configure a Windows XP SP2 client to establish a L2TP over IPsec connection to the TMS zl
Module.
Before you configure the VPN connection, make sure to uninstall the HP ProCurve VPN client
or any other third-party VPN client; these clients can interfere with the Windows XP client.
Then complete these steps:
1. On the Windows XP client, open the Network Connections window.
2. Click New Connection Wizard.
3. The wizard is launched. Click Next.
4. Select Connect to the network at my workplace.
Figure C-56. Windows XP—New Connection Wizard
5. Click Next.
6. Select Virtual Private Network connection.