HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-50
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Client-to-Site L2TP over IPsec VPN for Windows XP Clients
Figure C-59. Windows XP—New Connection Wizard
10. If the Public Network page is displayed, specify whether the client needs to make a dial-up
connection. If the workstation’s Internet connection is through a dial-up connection, select
that connection for Automatically dial this initial connection. Otherwise, select Do not dial the
initial connection.
11. Click Next.
12. For Host name or IP address, type the TMS zl Module’s public IP address or type an FQDN
that resolves to this address.
This IP address or FQDN must be the Local Gateway IP Address in the IKE policy configured
on the TMS zl Module. For this example, it is 10.1.1.1, the IP address on a VLAN in the
External zone.
Figure C-60. Windows XP—New Connection Wizard
13. Click Next.