HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-58
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Client-to-Site IPsec VPN for Macintosh IPSecuritas Clients
b. Create one address object for each remote client:
i. For Name, type a name that is meaningful to you. For this example, type Client1.
ii. For Type , select IP.
iii. Click Single-entry.
iv. In the box below, specify the client’s public IP address.
v. Click Apply.
vi. Repeat these steps for each remote Macintosh client.
vii. Click Close in Add Address window.
viii. Click the Address Groups tab.
ix. Click Add Address Group.
In the Group Name field, specify a name for the address group. For this example,
type MacClients.
You can use only letters, numbers, and the underscore character (_) in this field.
Figure C-71. Add Address Group Window
x. From the Available Addresses list, select an address object.
xi. Click the Move Right button to move the object into the Group Members list.
xii. Select and move all of the address objects that you want to include in the address
group.
xiii. Click Apply.
xiv. Click Close.
6. Click Save.