HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-87
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Client-to-Site IPsec VPN for HP ProCurve VPN Clients
Create an IPsec Policy for a Client-to-Site IPsec VPN with HP ProCurve VPN
Clients
This section explains how to configure an IPsec policy for a client-to-site VPN that is intended
for HP ProCurve VPN clients. The IPsec policy selects traffic between local IP addresses that
are accessible to the remote clients and the IP addresses assigned to remote clients (using IKE
mode config). The policy also includes security settings for the IPsec connection.
Follow these steps to create the IPsec policy:
1. In the left navigation bar of the Web browser interface, select VPN > IPsec.
2. Click the IPsec Policies tab.
Figure C-106. VPN > IPsec > IPsec Policies Window
3. Click Add IPsec Policy.
Figure C-107. Add IPsec Policy Window—Step 1 of 4
4. For Policy Name, type a unique, alphanumeric string between 1 and 10 characters. For this
example, type ProCurveCs.