HP ProCurve Threat Management Solution Implementation Guide 2009-05

C-99
Configure VPNs Using the HP ProCurve Threat Management Services zl Module
Configure a Client-to-Site IPsec VPN for HP ProCurve VPN Clients
Figure C-117. ProCurve VPN Client—Security Policy Editor—New Connection > My Identity Window
11. Configure authentication settings to match the settings on the TMS zl Module. This
configuration uses preshared keys:
a. For Select Certificate, select None.
b. Click Pre-Shared Key.
Figure C-118. ProCurve VPN Client—Security Policy Editor—
Pre-Shared Key Window
c. Click Enter Key and type the preshared key that you specified in the module’s IKE policy.
For this example, type procurvekey!.
d. Click OK.
12. For ID Type, match the remote ID type in TMS zl Module’s IKE policy. For this example,
select Domain Name.
13. If you selected Domain Name or E-mail Address for ID Type, you must configure the ID value.
In the box below ID Type, type a string that matches the module’s remote ID value. For this
example, type user1.procurvelabs.com.