HP ProCurve zl Wireless Edge Services Module -- Process for Converting a Radio Port License

2
Prerequisites
To remove and install licenses, you will need:
O To be registered on the My ProCurve Web portal.
Registration is free, and it allows you to perform all
of the licensing functions.
If you are not already registered, point your Web
browser to http://my.procurve.com and follow the
registration instructions.
O In addition, you will need config-level access to the
ProCurve network devices you wish to manage. You
will need Web browser interface or command line
interface (CLI) access to the device, including
management-level passwords for each device.
Terminology
When removing or installing licenses, you should
understand several identification numbers:
O registration ID — This number came with the license
you purchased, and represents your right to install a
particular type of license on a particular type of
network device.
O hardware ID — This number identifies the ProCurve
Wireless EDGE Services Module that you are
installing or removing licenses from. It includes the
module's serial number and an identifier for the
license.
O license key — This number is generated by the
My ProCurve portal, based on a registration ID and
a hardware ID. When you install this number into
your ProCurve Wireless EDGE Services Module, it
enables the radio ports that you are licensing.