HP Router Service Modules - HP SECBLADENSM-CMW520-R3109 Release Notes

HP SECBLADENSM-CMW520-R3109
Release Notes
Hewlett-Packard Development Company, L.P.
18
NOTE:
• A boot file is an application file used to boot the SecBlade card. When there are
multiple application files on the CF card, you can use the boot-loader command to
specify an application file for the next boot.
The main application file is used to boot the
SecBlade card. The backup application file is used to boot the SecBlade card when
the main application file is unavailable.
• The SSL VPN cards do not support the boot-loader command. You can specify an
application file for the next boot by configuring the attribute of the application file to M
on the BootWare menu.
Specifying a configuration file
Use the startup saved-configuration cfgfile command in user view to specify a
configuration file for the next boot and then restart the device. In the command, cfgfile is
the name of the configuration file.
Software upgrade in conventional methods
SecBlade cards provide the BootWare menu and a CLI, through either of which you can
configure, manage, and upgrade the cards.
Preparations for software upgrade
Before upgrading the software in conventional methods, set up a configuration
environment.
Setting HyperTerminal parameters
The following describes how to set HyperTerminal parameters on the PC running Windows
XP:
Step1 Select Start > Programs/All Programs > Accessories > Communications > HyperTerminal to
establish a HyperTerminal connection.
Step2 In the Connection Description dialog box, enter a name for the connection and click OK,
as shown in Figure 2.