HP Router Service Modules - HP SECBLADENSM-CMW520-R3109 Release Notes

HP SECBLADENSM-CMW520-R3109
Release Notes
Hewlett-Packard Development Company, L.P.
23
CPU L1 Cache : 32KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 4096MB
Memory Speed : 533MHz
BootWare Size : 1536KB
Flash Size : 4MB
cfa0 Size : 247MB
CPLD Version : 3.0
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter the extended boot menu. Otherwise, the SecBlade card will enter the
application file decompression process.
NOTE:
• You must press Ctrl+B
in four seconds after “Press Ctrl+B to enter extended boot menu”
appears. Otherwise, the SecBlade card will enter the application file decompression
process.
• After the SecBlade card enters the application decompression process, if you want to
enter the extended boot menu, you need to reboot the SecBlade card.
•
The extended boot menu is referred to as the main menu unless otherwise specified.
Press Ctrl+B when “Press Ctrl+B to enter extended boot menu...” appears, and the
SecBlade card prompts:
Please input BootWare password:
You are required to enter the BootWare password. (Note: The initial BootWare password is
null. You have three attempts to enter the correct BootWare password. A fourth attempt
will make the card halt and you need to restart the card to enter the correct password.)
After you type the correct BootWare password, the current operating device and the main
menu are displayed. On the main menu, you can select 9 to choose a storage device.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==================<EXTEND-BootWare MENU>=====================
| <1> Boot System |
| <2> Enter Serial SubMenu |
| <3> Enter Ethernet SubMenu |
| <4> File Control |
| <5> Modify BootWare Password |
| <6> Skip Current System Configuration |
| <7> BootWare Operation Menu |
| <8> Clear Super Password |
| <9> Storage Device Operation |