HP Router Service Modules - HP SECBLADENSM-CMW520-R3109 Release Notes

HP SECBLADENSM-CMW520-R3109
Release Notes
Hewlett-Packard Development Company, L.P.
24
| <0> Reboot |
=============================================================
Enter your choice(0-9):
The main menu is described in Table 10.
Table 10 Main menu
Menu item Description
<1> Boot System Boot an application from the CF card.
<2> Enter Serial SubMenu
Enter the serial submenu.
For details, refer to “Serial ” on page 24.
<3> Enter Ethernet SubMenu
Enter the Ethernet submenu.
For details, refer to “Ethernet ” on page 25.
<4> File Control
Enter the file control submenu.
For details, refer to “File control ” on page 26.
<5> Modify BootWare Password Modify the BootWare password.
<6> Skip Current System
Configuration
Ignore the current system configuration.
The operation is one-off valid for the current boot. If you want
the SecBlade card to ignore the current configuration at the
next boot, you need to perform this operation.
<7> BootWare Operation Menu
Enter the BootWare operation submenu.
For details, refer to “BootWare operation ” on page 26.
<8> Clear Super Password
Clear the super user password.
The super user password is required in user level switching.
By default, no super user password is set.
The setting is valid only for the first reboot of the SecBlade
card and the super user password will be restored next time
the SecBlade card reboots.
<9> Storage Device Operation
Enter the storage device operation submenu to select
applications from a storage device to boot the SecBlade
card.
<0> Reboot Reboot the SecBlade card.
Serial submenu
Select 2 on the main menu to enter the serial submenu, where you can upgrade
applications using Xmodem. The serial submenu is as follows:
======================<SERIAL SUB-MENU>======================
|Note:the operating device is cfa0 |
| <1> Download Application Program To SDRAM And Run |
| <2> Update Main Application File |
| <3> Update Backup Application File |
| <4> Update Secure Application File |
| <5> Modify Serial Interface Parameter |
| <0> Exit To Main Menu |