HP Router Service Modules - HP SECBLADENSM-CMW520-R3109 Release Notes

HP SECBLADENSM-CMW520-R3109

Release Notes

Hewlett-Packard Development Company, L.P.

You can upgrade application files using TFTP in the following two ways:

• On the BootWare menu

• At the CLI

Upgrading applications using TFTP on the BootWare

Step1 Set up a TFTP upgrade environment.

• The SecBlade card serves as the TFTP client while the PC serves as the TFTP server.

• Use a crossover Ethernet cable to connect Ethernet interface GigabitEthernet 0/2 on

the SecBlade card to the PC and ensure the connectivity between the SecBlade card

and the PC.

• Enable the TFTP server on the PC and set the path where the application files are

stored.

CAUTION:

• The TFTP server program is not shipped with the SecBlade card and you need to

purchase and install it.

• When you upgrade application files using TFTP on the BootWare menu, use Ethernet

interface GigabitEthernet 0/2 on the SecBlade card.

Step2 Configure Ethernet interface parameters on the BootWare menu.

Select 3 on the main menu to enter the Ethernet submenu, where you can select 5 to enter

the Ethernet parameter setting interface to configure the Ethernet interface parameters.

==================<ETHERNET PARAMETER SET>===================

Note: '.' = Clear field.

'-' = Go to previous field.

Ctrl+D = Quit.

=============================================================

Protocol (FTP or TFTP):tftp

Load File Name :main.bin

:main.bin

Target File Name :main.bin

:main.bin

Server IP Address :192.168.80.200

Local IP Address :192.168.80.10

Gateway IP Address :

FTP User Name :

FTP User Password :

Table 16 Description of display information about Ethernet interface parameter

configuration

Field Description

'.' = Clear field To clear the current field, input a (.) and then press Enter.