HP Router Service Modules - HP SECBLADENSM-CMW520-R3109 Release Notes

HP SECBLADENSM-CMW520-R3109
Release Notes
Hewlett-Packard Development Company, L.P.
35
Field Description
'-' = Go to previous field
To go to the previous field, input a hyphen (-) and then press
Enter.
Ctrl+D = Quit
The shortcut key combination for quitting the Ethernet
parameter setting interface is Ctrl+D.
Protocol (FTP or TFTP) Select TFTP or FTP to upgrade applications.
Load File Name
Select the file to be downloaded.
Set the path where the file is stored on the TFTP server.
NOTE:
• The first “main.bin” is the file name automatically
remembered by the system at the last update; the second
“main.bin” is the source file name set by the user.
• An application file name including the extension such
as .bin, cannot exceed 50 characters.
Target File Name
Set a name for the target file to be saved to the SecBlade card
and the extension of the target file needs to be the same as that
of the downloaded file.
NOTE:
• The first “main.bin” is the target file name automatically
remembered by the system at the last update.
• The second “main.bin” is the target file name set by the user
for this update.
If you want the SecBlade card to use the downloaded file, you
need to specify the file for the next boot. For related
information, refer to “Specifying ” on page 17.
Server IP Address IP address of the TFTP server
Local IP Address IP address of the interface connecting the TFTP server
Gateway IP Address IP address of the gateway. You do not need to configure it.
FTP User Name
FTP username, which will be used for FTP downloading, but not
for TFTP downloading.
FTP User Password
FTP password, which will be used for FTP downloading, but not
for TFTP downloading.
NOTE:
• To use the default parameter after a colon, press Enter directly.
• If the Ethernet port parameter settings fail to pass CRC check, the system adopts the
default settings and displays “Check net params crc error, use the default value.”
Step3 After the above configurations, you will return to the Ethernet submenu, where you can
select 2 to upgrade the main application file.
Loading................................... done
10129712 bytes downloaded!
Updating File cfa0:/main.bin