HP Router Service Modules - HP SECBLADENSM-CMW520-R3109 Release Notes

HP SECBLADENSM-CMW520-R3109

Release Notes

Hewlett-Packard Development Company, L.P.

.........

Update Success!

CAUTION:

• If the application file name you entered already exists on the CF card, “The file exists,

will you overwrite it? [Y/N]” will be prompted. If you enter Y, the application file on the

CF card will be directly overwritten.

The upgraded application file will become the only

main application file.

• Make sure that the available space on the CF card is enough. Otherwise, “The free

space isn’t enough” will be prompted.

• If you want the SecBlade card to use the downloaded file, you need to specify the file

for the next boot. For related information, refer to “Specifying ” on page 17.

Step4 After the main application file is upgraded, select 0 to return to the main menu, where you

can select 1 on the main menu to reboot the SecBlade card from the CF card.

Upgrading application files using TFTP at the CLI

Step1 Set up an upgrade environment.

Connect the PC to an Ethernet interface (for example, GigabitEthernet 0/1) on a SecBlade

and ensure the connectivity between them.

• The SecBlade card serves as the TFTP client while the PC serves as the TFTP server.

• Use a crossover Ethernet cable to connect Ethernet interface GigabitEthernet 0/1 on

the SecBlade card to the PC.

• Configure IP addresses for the TFTP server and client and ensure that they are on the

same network segment. In this example, the IP address of the TFTP server (PC) is

192.168.80.200 and that of the TFTP client (GigabitEthernet 0/1) is 192.168.80.10. Use the

ping command to check the connectivity between them.

• Enable the terminal emulation program on the PC.

• View the files and the available space on the CF card.

Use the dir command to query the files in the current file system and the available space on

the CF card to prepare for application upgrade.

<HP> dir

Directory of cfa0:/

0 -rw- 10867848 Jun 13 2007 13:21:20 main.bin

1 -rw- 4722 Jun 26 2007 12:55:42 config.cfg

2 -rw- 1128 Jun 27 2007 11:07:24 startup.cfg

3 -rw- 10129712 Jun 27 2007 10:26:02 update.bin

4 drw- - Jun 02 2007 18:28:14 logfile

62472 KB total (41855.5 KB free)

File system type of cfa0: FAT16

<HP>