HP Router Service Modules Series - HP SECBLADENSM-CMW520-R3109P03 Release Notes

The boot file used next time:cfa0:/ns_card.bin attribute: main

Failed to get the backup boot file used next time!

Failed to get the secure boot file used next time!

5. Perform the reboot command in user view to reboot the NetStream card.

<Sysname> reboot

Start to check configuration with next startup configuration file, please wait.

........DONE!

This command will reboot the device. Continue? [Y/N]:y

System start booting...

…

6. After the reboot is complete, perform the display version command to verify that the

system software image is correct.

<Sysname> display version

HP Comware Platform Software

Comware Software, Version 5.20, Release 3109

HP SecBlade NS uptime is 0 week, 0 day, 0 hour, 42 minutes

CPU type: RMI XLR732 1000MHz CPU

2048M bytes DDR2 SDRAM Memory

4M bytes Flash Memory

244M bytes CF0 Card

PCB Version:Ver.A

Logic Version: 3.0

Basic BootWare Version: 1.28

Extend BootWare Version: 1.50

[FIXED PORT] CON (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/2 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/3 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/4 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] XGE0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

Upgrading from the BootWare menu

You can use the following methods to upgrade software from the BootWare menu:

 Using TFTP/FTP to upgrade software through an Ethernet port

 Using XMODEM to upgrade software through the console port

TIP:

Upgrading through an Ethernet port is faster than through the console port.