HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

3-14

Ready the Data Center for an SBM Deployment

Communicate Information to the SBM Administrator

Figure 3-1. SIP Ports

■ SIP transport protocol for communications from the Media Gateway to

the Mediation Server:

• TLS (recommended)

•TCP

This is the protocol defined for the SBM’s Mediation Server in the topol-

ogy.

■ Primary SIP server port only if it is not standard

This is the listening port defined for the SBM’s Mediation Server in the

topology. The default port for TCP is 5068, and the default port for TLS is

5067 (as shown next to the number 2 in Figure 3-1).

Non-standard primary SIP server port: _______________________

The SBM installer should refer to the HP Survivable Branch Communica-

tions zl Module powered by Microsoft Lync

Installation and Getting

Started Guide and the HP Survivable Branch Communications zl Module

Administrator’s Guide for further instructions.