HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-13
Example Solutions
Solution
19. Type HOST/<FQDN>. As shown in the figure, replace <FQDN> with the
proper fully qualified domain name (FQDN) for the SBM, which is seattle-
sbm.example.hp.com. For this example, you would enter HOST/seattle-
sbm.example.hp.com.
Figure 4-11. CN=<SBM Name> Properties
20. Click Add.
21. Click OK. Then click Apply and OK until you have closed all windows.
Add User Accounts
You must add several user accounts for the example solution:
■ The new account for the person installing the SBM
Alternatively, you could make existing domain users members of the
RTCUniversalSBATechnicians group. In this example, however, you are
creating a new account for the SBM technician and making this account
a member of the RTCUniversalSBATechnicians group. In the example
solution, the person installing both SBMs will use the same account
(sbmtech).
■ Four accounts for test users, two for each Health Monitoring pool (used
to validate the SBM’s setup)