HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-20
Example Solutions
Solution
Figure 4-16. DHCP Server > [server name] > IPv4 > [scope] > Reservations Window
e. Click Add.
Set up the Lync Solution for the New SBMs
In this solution, the company already has a Lync Server 2010 solution. A CS
administrator must prepare the solution for the new SBMs after the Enterprise
or Domain Admin has added the SBM computer objects but before the SBMs
are installed.
The CS administrator must complete these tasks:
■ “Add the Survivable Branch to the Lync Server Topology” on page 4-21
■ “Create Routing and Normalization Rules” on page 4-31
■ “Assign Test Users to the SBM” on page 4-45
■ “Configure Media Bypass” on page 4-49
■ “Create the Health Monitoring Pool” on page 4-53
After the SBM has been installed, the CS administrator will assign branch users
to the SBM. (See “Assign Branch Users to the SBM” on page 4-94.)