HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-45
Example Solutions
Solution
36. Click OK in the New Voice Policy window.
37. Click Commit > Commit all.
38. In the Uncommitted Voice Configuration window, click Commit. Then click
Close.
For this solution, you will use the global dial plan, which normalizes numbers
for transmission to the PSTN gateway, for all branch sites. This plan is
configured by default, so you are finished creating the voice policies for the
branch sites.
Assign Test Users to the SBM
As mentioned in “Assign Test Users to the SBM” on page 4-45, it is best practice
to wait to assign active Lync users to the SBM until after the SBM has been
installed and tested. For now, you will simply add the test accounts created
for the SBM’s health monitoring pool to Lync. This task should be completed
by a CS Administrator or CS User Administrator.
1. In the Lync Server 2010 Control Panel, click the Users tab.