HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-49
Example Solutions
Solution
Configure Media Bypass
In this section, you configure Media Bypass. This task should be completed
by a CS Administrator.
Follow these steps to enable Media Bypass if it is not already enabled:
1. In the left navigation bar on the Lync Server 2010 Control Panel, click
Network Configuration.
2. Click the Global tab.
Figure 4-43. Lync Server 2010 Control Panel > Users > New Lync Server User
Window
a. Click Edit > Show details.
b. Select the Enable Media Bypass check box.
c. Select Use sites and region configuration.