HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-52
Example Solutions
Solution
5. For Region, select the region to which the site belongs. For this example,
select Company.
6. Click Commit.
7. Click the Subnets tab.
8. Click New.
Figure 4-46. Lync Server 2010 Control Panel > Network Configuration > Global >
Subnet Window
9. For Subnet, type the network address of the voice subnet at the site. For
this example, type 10.4.1.0.
10. For Mask, type the prefix length for the subnet. For this example, type 24.
11. For Network ID, select Seattle.
12. Click Commit.
If your site has multiple voice subnets, repeat these steps to add the other
subnets.