HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-67

Example Solutions

Solution

3. A warning is displayed that there is a problem with the site’s certificate.

Figure 4-57. IE 7—Certificate Security Warning Window

Initially, the SBM uses a self-signed certificate, so your browser does not

trust it. Click Continue to this website (not recommended).

Note If you cannot access the SBM at this IP address, you must access it through

the HP zl switch CLI and check or set the IP address. Refer to the HP

Survivable Branch Communication zl Module powered by Microsoft Lync

Installation and Getting Started Guide for help.

4. You may be prompted to enter a username and password by the browser.

The default credentials are:

• Username = SBMAdmin.

• Password = P@ssw0rd.

Note Note that in the default password, a has been replaced with @, and o has been

replaced with the digit 0.

5. Because you are accessing the SBM for the first time, you are prompted

to change the password.