HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-72
Example Solutions
Solution
15. Select your timezone from the Set Timezone list. In this example, select the
Pacific timezone.
Figure 4-62. Setup Wizard—Configure System Time
16. If you enabled Daylight Saving Time on the switch (as you did in this
solution), leave the check box selected.
17. Click Set Time Zone.
Note Changes to the HP zl switch time will not take effect on the SBM until the SBM
reboots.
18. Click Next.
19. On this page, you join the SBM to the domain. For Computer Name, type
the SBM’s permanent name, which must match the name defined in AD.
For this example, type seattle_sbm.